We found the following page: “AMD Opteron™ Processor Utilities and Updates”. Check that File and print sharing is enabled on the NIC. Every tests we did was fine except the user login over VPN. At the command prompt, type gpupdate, and then check Event Viewer to see if the Userenv 1054 event is logged again. http://kelcours.com/event-id/error-1054-cannot-obtain-domain-controller.html
NOTE: See tip 7243 for another reason for Event ID 1054. The weird part was that the GPO settings seemed to be ok, it was just that the software wouldn't install. Check Netbios, usually is on Default.Join the AD, from the PC. 0Votes Share Flag Collapse - i tried by miketkelly Â· 8 years ago In reply to Try... Sweden 15.
Repeat this command several times. Covered by US Patent. If spanning tree is enabled it will take a minimum of 30 seconds before that port is capable of traffic. Event Id 1054 Dns x 239 Anonymous My problem was an old entry in _msdcs under my domain (an old DNS server was configured).
x 221 Rob Lamb I found that my pc was connected to an older switch, and it wasn't receiving its group policies correctly. I see you have tried the GPO "fix". Here is a list of the top 15 countries with the highest number of visitors. 1. https://support.microsoft.com/en-us/kb/326152 The reason you do not see a problem with all NICs is because some never perform a reset.
To correct the problem I set this flag in the registry to force it to treat the link as fast. Windows Cannot Obtain The Domain Controller Name Server 2003 W2K and XP both require an accurate DNS server that accepts active updates. Thai Pepper Sep 4, 2013 Vasily Ignatov It Service Provider, 1-50 Employees Event 1054 followed by events 1000: Cannot connect to domain controller and cannot apply Group Policy with Gigabit Ethernet Disable the windows firewall on the file server.
Thai Pepper Apr 21, 2010 Stephen5797 Manufacturing, 101-250 Employees @ATScuba - Try re-creating the user profile and disjoining/re-joining the PC to the network. https://community.spiceworks.com/windows_event/show/49-userenv-1054 To troubleshoot the network connectivity or configuration problem, try one or all of the following: In Event Viewer, click System, and check for any networking-related messages, such as Netlogon messages, that Event Id 1054 Group Policy http://support.microsoft.com/kb/324174 http://support.microsoft.com/kb/326152 http://www.eventid.net/display.asp?eventid=1054&eventno=1393&source=Userenv&phase=1 http://www.windowstricks.in/2009/07/gpo-update-failed-in-slow-link-vpn-site.html http://msmvps.com/blogs/acefekay/archive/2010/08/12/eventid-1054.aspx Hope this helps Regards, Sandesh Dubey. ------------------------------- MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator My Blog: http://sandeshdubey.wordpress.com This posting is provided AS IS with no warranties, and confers no rights. Event Id 1054 Group Policy Windows 2008 R2 Group Policy processing aborted.
If you have any sort of multi-core or multi-processor system, have your server ping itself. Check This Out The card doesn't support Zero Configuration and the NIC software doesn't load until after logon so it cannot connect to the DC until after the logon to the local workstation. The DC is a Win2k3 and I installed on it a firewall. The only thing i can think of is that my nic hasn't finished initializing. Event Id 1054 Error Code 58
I and also seen this when the domains ntp server is unable to find its external time source so PCs stop synching time with the server. Thanks in advance 0 LVL 6 Overall: Level 6 Windows XP 6 Message Expert Comment by:Antunb2006-04-17 Comment Utility Permalink(# a16474024) take it off the domain add it to a workgroup South Africa 11. Source After reading another post here that updating a different AMD processor driver fixed the issue, we checked for a driver update for the Opteron.
Windows Server > Group Policy Question 0 Sign in to vote We have a file server Windows Server 2003 that is joined to our head department domain controller. Event Id 1054 On Domain Controller Other available timers include the PM_Timer and the High Precision Event Timer (HPET)." x 228 LH We had a Windows 2003 as PDC which was not able to even find himself. Note: Weird, the time ordering of system for Netlogon is not right, as early time 4:48:31 PM of b57w2k showed after Netlogon, 4:48:40 PM time: Information 4/17/2006 4:48:31 PM b57w2k Error
See ME305293. This error was among several. Event ID: 1054 Source: Userenv Type: Error Description: Windows cannot obtain the domain controller name for your computer network. (The specified domain either does not exist or could not be contacted). Event Id 1054 Server 2012 could be that the network card initiates after the GPO settings should be read???
After having tried every possible solution on this site, I think the following did the trick: 1. We began to see this event every 5 minutes continuously whether a user was logged on or not. x 2 Anonymous I had this problem on two Win2k3 member servers and resolved it by disjoining the domain, then re-joining the domain. have a peek here x 217 Anonymous I initially fixed this by using the solution proposed by Christophe Derdeyn, but I have since found a more complete solution that addresses the underlying fault.
Thanks. 0 LVL 77 Overall: Level 77 Windows XP 17 Message Active today Accepted Solution by:Rob Williams2006-04-17 Rob Williams earned 500 total points Comment Utility Permalink(# a16474557) Seems this most Le traitement de la stratÃ©gie de groupe est interrompu.Aug 30, 2011 Windows cannot obtain the domain controller name for your computer network. (Erreur rÃ©seau inattendue. ). Combofix, fixed the issue then i was able to re-add it to the domain. Then moved the PC-Account in the ActiveDirectory to the container with the GPO I want to apply to the PCs.
It is possible the update above can cause the issue in this document, so as a precaution I have included it here as well. x 2 EventID.Net Error: "A socket operation was attempted to an unreachable host." - As per Microsoft, this event may occur if the address for the configured preferred Domain Name System I have tried uninstall and re-install the NIC but I have still have the same issue. See ME840669 to resolve this problem.
x 202 Anonymous I had the same problem (The error description was "An unexpected network error occurred"). x 199 Anonymous In my case, this problem was caused by the "AEGIS Protocol (IEEE 802.1x) v 126.96.36.199" driver that was probably installed together with the ASUS WLAN driver. Set the /usepmtimer switch in boot.ini and reboot the system. x 9 EventID.Net As per Microsoft: "This problem may occur if the Group Policy engine or Active Directory times out while it waits for the network to start.
You'll also learn how to use your custoâ€¦ MS Excel Fonts-Typography MS Office Advertise Here 779 members asked questions and received personalized solutions in the past 7 days. First, I logged on as local administrator, and did the setup of the Wireless USB, then rebooted and it worked. See ME924441 for the update from Microsoft. This event occurred together with Event ID 14 from source W32Time, Event ID 29 from source W32Time and Event ID 5719 from source NETLOGON.
To fix this problem: 1. Florida 8. Any solution that works? Event ID 1054 is logged in the Application log in Windows Server 2003 or in Windows XP Professional http://support.microsoft.com/kb/324174 Cannot connect to domain controller and cannot apply Group Policy with Gigabit
If the TCP/IP protocol registers with NDIS before the network adaptor driver, for a short time it prompts higher user mode networking components that network connectivity is not available. Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System] "GroupPolicyMinTransferRate"=dword:00000000 This has reduced the frequency of the errors to a few times a day and the GPO seems to be updating correctly. Good luck, --Rob 0 LVL 4 Overall: Level 4 Message Expert Comment by:rsly2009-10-23 Comment Utility Permalink(# a25646849) The GpNetworkStartTimeoutPolicyValue registry change just solved an issue I was having with an Windows IT Pro Guest Blogs Veeam All Sponsored Blogs Advertisement Join the Conversation Get answers to questions, share tips, and engage with the IT professional community at myITforum.
© Copyright 2017 kelcours.com. All rights reserved.